Apple M9649G/A Manual Do Utilizador

Página de 20
 
3
 
1
 
Installing the 
VESA Mount Adapter
 
To use your Apple Cinema Display (model numbers A1081, A1082, and A1083) with a 
VESA-compatible flat-panel mounting solution, install the VESA Mount Adapter on 
the back of your display. Follow the installation instructions in this guide.
 
1
 
Turn off your display and computer. Unplug the DC power cord from the power 
adapter, and unplug the DVI, USB, and FireWire cables from the computer. Carefully 
pull the entire display cable assembly through the hole in the stand.
 
2
 
Place a soft, clean towel or cloth on a desk or flat surface. Holding the sides of the 
display, carefully lay it down so the screen is flat against the towel or cloth on the 
desk or surface.
 
3
 
Using the hex tool that came with this kit, loosen the screws that attach the stand to 
the back of the display as shown in the illustration. Remove the screws and stand and 
put them in a safe place in case you want to reattach the stand.
®
¤
Screws
Display cable
Stand
Hex tool
 
4-2689MAK.book  Page 3  Friday, May 28, 2004  2:34 PM