Matrox Electronic Systems T2GDP3DIF Manual Do Utilizador

2

Cause

Your monitor video controls may be improperly set.

1

Solution

Adjust your monitor controls (brightness, contrast, and so on). For more information, see 
your monitor manual.

3

Cause

Your monitors may not be properly connected.

1

Solution

Make sure all connectors are properly fastened.

4

Cause

The image quality of your displays may need to be adjusted.

1

Solution

If your monitor has an auto-adjust control, try using it to adjust the image quality of your 
displays. For more information, see your monitor manual.

Screen image defects appear
(tearing)

1

Cause

You may be using a higher display resolution than what your graphics hardware supports.

1

Solution

Select a lower display resolution. This generally results in better image quality.

2

Solution

If you’re using a 32-bit color palette, try using a 16-bit color palette instead.

1

Cause

Another window or dialog box may be covering the window or dialog box you want to see.

1

Solution

Move, close, or minimize any window or dialog box that may be covering the window or 
dialog box you want to see.

2

Cause

If you’re using multi-display mode, the program window or dialog box may be in a display 
or on a monitor that’s unusable. (For example, your monitor may not be properly connected 
or configured.)

1

Solution

Make sure all the displays and monitors you want to use are usable. For more information, 
see other troubleshooting items in this guide.

 While using Matrox TripleHead2Go, gamma correction for each monitor isn’t 

supported.