Ariens 991082 ZT HD48 Manual Do Utilizador

GB - 15

The throttle lever changes 
the engine speed. Move 
the throttle lever to Fast (1) 
to increase engine speed. 
Move the lever to Slow (2) 
to decrease engine speed.

Pull the lever back to set 
the pump in neutral and 
move the unit with the 
engine off.
Push the lever in to set the 
pump in the drive position 
and operate the unit.

Power take off (PTO) 
switch engages and 
disengages the mower 
blades.

Pull the power take off 
(PTO) switch to "On" 
position to engage mower 
blades.

Push the power take off 

(PTO) switch to "Off" position to disengage 
mower blades.
NOTE: The engine will not start unless the 
steering control levers are in the neutral 
position, the PTO switch is in the “Off” 
position and parking brake is set.

Mower lift pedal raises and lowers mower 
deck for mowing or transport.
Transport:

Push mower lift pedal all the way forward until 
lift lock engages.

Cutting Height:

Put cutting height adjustment pin in desired 
hole. Push mower lift pedal forward and hold 
it while pushing down on the lift lock. Slowly 
lower mower lift pedal until deck lift contacts 
cutting height adjustment pin.

1. Pull lever up to engage 
parking brake.
2. Push lever down to 
disengage parking brake.

To adjust seat forward or backward:

1. While seated, pull seat adjustment lever 

outward and slide seat into desired 
position.

2. Release lever and slide seat forward or 

back to lock seat into position.

Press and release the toggle button to shift 
between different functions. 

Press and hold the toggle button to reset the 
timer or clear a service message.
The hour meter has three functions:

Hour Meter: measures the amount of time 
the engine has been run. This time cannot be 
cleared.

Timer (TMR1): measures the time spent on 
individual jobs. 
Press and hold the toggle button to reset the 
timer to zero. TMR1 will then start measuring 
engine run time until it is reset to zero again.

Service Alert (Chg Oil, Chg H Oil & Filter, 
SVC Airfilter):  reminds operators of the 
maintenance interval for changing the engine 
oil, changing the hydraulic oil and filter and 
servicing the air filter. 

The alert starts counting down two hours 
before the maintenance is due. The meter 
flashes the word, "Now," when it reaches the 
maintenance time.
Press and hold the toggle button to reset the 
maintenance clock to zero after perfoming 
the service.

OF1700

2

1

Drive

Neutral

OE0261

OFF

ON

OF1700

WARNING: Make all seat 
adjustments with unit stationary, 
parking brake on and engine shut 
off.

OF1740