Samsung DVD-TR520 Manual Do Utilizador

English - 37

1. Off : Doesn’t output DTS signal. Select this

when your AV receiver or AV amplifier
does not have a DTS decoder.

2. On : Outputs DTS Bitstream via the digital

output when you play DTS track. Select
this only when your AV receiver (or AV
amplifier) has a DTS decoder.

This is only active when a Dolby Digital signal is
detected.   

1. On : When Movie soundtracks are played at

low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.   

2. Off : You can enjoy the movie with the

standard Dynamic Range.

1. PCM : Select this when your equipment is not

Dolby digital compatible.

2. Bitstream : Outputs Dolby Digital (or MPEG-2)

audio as bitstream. Select this
when your AV receiver or AV
amplifier has a Dolby Digital (or
MPEG-2) Decoder.

■ 

Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always output as
PCM. It cannot be changed with the
Digital Output setting. 

■ 

Be sure to select the correct Digital
Output or you will hear no sound or a
loud noise.

■ 

When DTS soundtrack is played, sound
is not output from the AV Audio Output.
It only outputs from the Digital Audio Out.

With the unit in Stop mode / No Disc mode, press
the MENU button.

Press the 

…†

buttons to select Setup, then press

the ENTER or 

√

button. 

Press the 

…†

buttons to select Video, then press

the ENTER or 

√

button.

Video setup menu will be displayed.

Press the 

…†

buttons to select the desired video

option, then press the ENTER or 

√

button.

This function allows you to set up the TV screen
settings. This function depends on disc type. It may
not work for some disc types.

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

00627D-DVD-TR520_XAA_25-41  2005.7.26  7:28 AM  Page 37