Roland R-88 Manual Do Utilizador

*  Once everything is properly connected (p. 28, p. 32), be sure to 

follow the procedure below to turn on their power. If you turn 

on equipment in the wrong order, you risk causing malfunction 

or equipment failure.

When you turn on the power, the start-up screen will appear in the 

display, and then the home screen will appear.

*  This unit is equipped with a protection circuit. A brief interval (a 

few seconds) after turning the unit on is required before it will 

operate normally.

*  Before turning the unit on/off, always be sure to turn the volume 

down. Even with the volume turned down, you might hear some 

sound when switching the unit on/off. However, this is normal 

and does not indicate a malfunction.

The power to this unit will be turned off automatically 

after a predetermined amount of time has passed since its 

buttons or controls were 

last 

operated (AUTO OFF function). 

If you do not want the power to be turned off automatically, 

disengage the AUTO OFF function as follows.

Ú

Ú

<AUTO OFF> is located on page 2/6. Touch 

 to access 

2/6.

•   Any settings that you are in the process of editing will be 

lost when the power is turned off. If you have any settings 

that you want to keep, you should save them beforehand.

•   To restore power, turn the power on again.