Roland R-88 Manual Do Utilizador
47
O
ver
vie
w
w
Q
uick G
uide
G
etting R
eady
IN/OUT/M
onit
or
or
Rec
or
ding/P
la
yback
M
ix
er
Timec
ode
ode
File O
per
ation
per
ation
USB
A
ppendix
TIMECODE
TIMECODE MODE
Here’s how to specify the timecode mode.
1.
Choose [MENU]
Ú
<TIMECODE/TIME>
Ú
<TIMECODE
SETUP>
Ú
<TIMECODE MODE> .
2.
Touch the mode that you want to use .
MODE
Explanation
OFF
Timecode will not be recorded.
INT
The R-88’s internal timecode will be recorded. Timecode
will always be running.
The time can be specified in the internal timecode
The time can be specified in the internal timecode
setting menu, either manually or by jamming.
RTC
The internal clock will be recorded instead of timecode.
* The internal clock time will be output as timecode
from TIMECODE OUT jack.
REC-RUN
The R-88’s internal timecode will be recorded. Timecode
will run only while recording.
* When the power is turned on, or when the REC-RUN
START TC setting has been made, timecode will start
running from REC-RUN START TC.
EXT SYNC
The external timecode sent from a connected device
will be recorded.
The R-88’s audio clock will synchronize to the external
The R-88’s audio clock will synchronize to the external
timecode.
* The R-88’s audio clock will vary. Use EXT (AUTO JAM) if
you want to fix the R-88’s audio clock.
* If external timecode stops being input, automatically
jammed internal timecode will be recorded.
EXT
(AUTO JAM)
The external timecode sent from a connected device
will be recorded.
* If external timecode stops being input, automatically
jammed internal timecode will be recorded.
MODE
Explanation
EXT SYNC REC
External timecode sent from a connected device will be
recorded. The R-88’s audio clock will synchronize to the
external timecode. Recording will begin automatically
when valid timecode is received, and recording will stop
when timecode reception stops.
* Recording will start immediately when valid timecode
is received.
* The R-88 will also respond to the [ ] (REC) button and
the [ ] (STOP) button.
* If external timecode stops being input, automatically
jammed internal timecode will be recorded.
* The R-88’s audio clock will vary. Use EXT REC if you
want to fix the R-88’s audio clock.
EXT REC
The external timecode sent from a connected device
will be recorded. Recording will begin automatically
when valid timecode is received, and recording will stop
when timecode reception stops.
* Recording will start immediately when valid timecode
is received.
* The R-88 will also respond to the [ ] (REC) button and
the [ ] (STOP) button.
* If external timecode stops being input, automatically
jammed internal timecode will be recorded.
In the home screen, the currently specified timecode mode is
shown at the right of the timecode indication.
This will indicate [EXT] if EXT SYNC, EXT (AUTO JAM), EXT SYNC
This will indicate [EXT] if EXT SYNC, EXT (AUTO JAM), EXT SYNC
AUTO REC, or EXT AUTO REC is specified.
TIMECODE MODE
MEMO
If the timecode mode is EXT SYNC, EXT (AUTO JAM), EXT SYNC
AUTO REC, or EXT AUTO REC, and timecode cannot be received
correctly, the [EXT] indication at the right of the timecode
indication in the recorder screen will blink (e.g., when timecode
is not being sent from the external device, or if it is being sent
but does not match the R-88’s frame rate).