Roland R-88 Manual Do Utilizador

SLATE

You can use the [SLATE] switch (p. 6) on the front panel to activate 

the slate mic (p. 6) or produce a slate tone.

If you slide the [SLATE] switch to the “TONE” position and hold it 

there for two seconds, a slate tone will be produced.
The slate tone can be recorded on all tracks of the recorder.
The slate tone will continue sounding even after you release the 

[SLATE] switch. It will turn off when you slide the switch once again.

Ú

Ú

<SLATE TONE> is located on page 5/6. Touch 

 to access 5/6.

Output only to the internal mixer’s output.

Output to the internal mixer’s output and to all tracks 

of the recorder. The slate tone will not be output to 

OUTPUT or to USB.

Output to the internal mixer’s output, to OUTPUT, and 

to USB. The slate tone will not be recorded.

Output to the internal mixer’s output, to all tracks of the 

recorder, to OUTPUT, and to USB.

When you slide the [SLATE] switch to the “MIC” position and hold 

it there for two seconds, the MIC indicator will light and the slate 

mic will turn on. You can use the slate mic to record credits or 

comments for the scene on each track of the recorder.
The slate mic will turn off when you release the switch.

Ú

Ú

<SLATE MIC ON/OFF> is located on page 5/6. Touch 

 to access 

5/6.

•  If the slate mic’s track setting is ON, it will be output to all 

destinations (recorder, OUTPUT jacks, and USB).

•  For details about slate mic and slate tone routing, refer to ”R-88