Sunfire TGM-100 Manual Do Utilizador

User’s Manual

The TGM-100 is designed to remain switched on continu-

ously.  However, if you are not planning to use it  for an 

extended period, you may want to switch it off.

To switch off, press the 

• 

;

 button on the front panel.  

After a brief period, the unit will switch off and the 

Power LED will go out.
To switch back on, press the 

• 

;

 button on the front 

panel again.  After a brief period, the unit will switch on, 

the Power LED will glow blue and the User Interface 

will display the 

menu screen. 

If the TGM-100 Server is switched off, any connected 

clients will be disconnected, but can still play DVDs and 

audio CDs using their slot loading drives.

This function is performed in the 

TV UI.

Press the

• 

 ;

Standby button on your remote control.

Press the 

• 

à

 

Library button to display the Home 

Screen.
Use the 

• 

U

 and V buttons to select the 

Set Up option.

Use the 

• 

O

 

Select button to display the Set Up menu.

Use the 

• 

U

 and V buttons again to select 

Restart.
Press the 

• 

O

 

Select button.

The TV will display the following screen:

To Shut down:

Highlight 

• 

Yes and press the OSelect button on the 

remote control to switch the unit off.

Note To switch the unit on again, use the ; button on the 

front panel or remote.

To Restart

From the 

• 

Power list item, highlight Restart and press 

the O

Select button on the remote control to switch the 

unit off and then on again.

Holding down the ; button on the front panel for 5 sec-

onds will force the unit to shut down immediately. This must 

only be performed if the unit becomes unresponsive and 

cannot be shut down correctly. Data corruption may occur 

as a result of improper shutdown.

Note: If you have any clients connected, should any one of 

the units in the networked system be forcibly shut down, all 

the units in the system should be restarted.