Kenwood MGR-A7 Manual Do Utilizador

English

  • When the Line output is used, the sound mode is set automatically to "NORMAL".  (page 34)

 

• Prepare an optimum audio cable (commercially available) according to the input terminal of 

the connected external component.

 

• When using a FM transmitter, noise may be interfered depending the installation environment, 

including the vehicle model, devices in the surroundings and the antenna positioning.

Stereo amplifier/ 
Car stereo

Cable with stereo mini-
plugs

The Line output can be used to connect an external component such as a speaker with 

built-in amplifier.

The USB connector can be used to connect an external component such as a stereo set 

with USB capability.

  • For the operating procedure and the playable files, read the instruction manual for the 

connected stereo set.

 

• Do not use or leave this unit or connected component in an automobile compartment with 

high temperatures. Otherwise, equipment failure may result.

 

• The internal memory and the SD card are recognized as separate drives. If a drive cannot be 

selected from USB-compatible stereo component, change the "Prioritized Drive" setting.  (page 

43)

 

• When the stereo component is switched off, the input selector is switched or the USB cable is 

disconnected, the USB connection is canceled and the database of this unit is updated. If you 

want to connect the stereo component with USB connection again, wait until the database 

updating finishes. 

FM transmitter

Speaker with built-in 
amplifier

USB-compatible stereo/ 
USB-compatible car stereo

USB cable