Kenwood KTC-H2A1 Manual Do Utilizador
Troubleshooting Guide (continued)
Specifications:
Audio output (100 ~ 250 ohms) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .950mV RMS
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A fast blow
Power supply requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 ~ 16V, negative ground
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5”(W) x 4
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A fast blow
Power supply requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 ~ 16V, negative ground
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5”(W) x 4
5
/
16
”(D) x 1
3
/
4
”(H)
Here
2
Anywhere Instruction Manual
27
Troubleshooting guide
Here
2
Anywhere Instruction Manual
26
Problem
Possible Cause
Solution
No power on Here
2
Anywhere (power
indicator /display not illuminated)
Power supply/cigarette lighter
adapter not properly connected
Blown fuse in cigarette lighter
Blown fuse in cigarette lighter
adapter
Make sure power supply/adapter
is properly connected
Check the fuse; if blown, replace
Check the fuse; if blown, replace
with supplied spare fuse
No sound
Audio cable/cassette adapter not
properly connected
Make sure cable/adapter is
properly connected
Display reads “Acquiring Signal”
Signal is weak or can’t be found
Check the Antenna Signal screen
(see page 25); Change the
antenna/vehicle location to
maximize signal quality
Display reads “Antenna Error”
The antenna is not connected
The antenna or cable is faulty
The antenna or cable is faulty
Verify antenna connections
Replace antenna
Replace antenna
Display reads “Call 1-888-539-SIRIUS to
Subscribe”
SIRIUS subscription has not been
activated
Call SIRIUS to activate your
subscription
Display reads “Invalid Channel”
Stream entered is invalid
Select a different SIRIUS stream
Problem
Possible Cause
Solution
Here
2
Anywhere operates
erroneously
Microprocessor error
Turn the power off (press the
POWER button), wait 5 – 10
seconds, then turn the power on
again.
Turn the unit’s power off, remove
it from the dock, wait 5 – 10
seconds, replace it in the dock
and turn the power back on.
If the problem persists, consult
your Kenwood dealer.