Earthquake Sound IQ-52W Manual Do Utilizador

Installation

For optimal performance of the IQ-52, please read the following directions carefully
before installation.

Use 3 meter 1/4” TS to 1/4” TS speaker cable included in the IQ-52 package to
connect the left and right speakers via the 1/4” TS jacks on the back of each speaker.

iPod® Universal Dock Adapters: Plays & Charges for your iPod®
Universal Dock Adaptor compatible for iPod®s: 4pcs, the number (8-11)
I. 8#. iPod nano® 2GB 4GB
II. 9#. iPod® with video 30GB
III. 10#. iPod® with video 60GB 80GB
IV. 11#. New iPod nano® 2GB 4GB 8GB

Before connecting the IQ-52 Powered Speaker System, make sure the power from the
computer or other output device has been turned off and the IQ-52 system is also
turned off.

Plug the RCA cable to the corresponding output connectors of a computer sound card,
portable music player, etc. You can also use the 1/8” stereo mini cable to connect a
secondary audio device to the AUX input.

Speaker Wire Connections

Connecting to iPod®

Connecting to a Computer Sound Card or Other Audio Output Device

WARNING! – Use of improper Voltage may result in hazardous conditions and/or
damage to speaker components not covered by speaker warranty.

Connections: Connect the RCA outputs of your IQ-52 to the corresponding computer
sound card, portable music player, or other audio device. We recommend that you use
the supplied cables (or cables of equal or higher quality) for all connections. Be sure
that the IQ-52 is powered off before making any connections.

Correct Power Operation: Since the IQ-52 contains amplifiers, it must be connected to
a power outlet using the detachable AC cable that is provided. Before connecting
power, please make sure that the On/Off switch to the off position.

Precautions