Alpine CDE-125EBT Manual Do Utilizador

-EN

01GB04CDE-125EBT.fm

ALPINE CDE-125EBT 68-16909Z39-A (EN)

USB Memory Connection (Optional)

Connect USB memory

Open the cover of the USB connection terminal.

Connect the USB memory directly to the USB
connection terminal, or via the USB cable.

Remove USB memory

Carefully, pull out the USB memory from the USB
cable or the USB connection terminal.

Close the cover of the USB connection terminal.

• Change to a source other than the USB memory mode, then remove

the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.

• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognised even when

USB memory is connected, remove USB memory once, then connect
it again.

• Route the USB cable away from other cables, etc.
• After removing the USB memory, close the cover of the USB

connection terminal to prevent dust or foreign objects from entering
and causing a malfunction.

About MP3 File of USB Memory

Playing back MP3

MP3 files are prepared, then stored to a USB memory. This unit
can recognise at least 100 folders (including root folder) and
100 files per folder stored in USB memory. Playback may not be
performed if a USB memory exceeds the limitations described
above.
Do not make a file’s playback time more than 1 hour.

Media supported

This device can play back USB memory media.

Corresponding File Systems

This device supports FAT 16/32 for USB memory device.

An iPod/iPhone can be connected to this unit by using the proprietary
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.

• Set AUX+ SETUP to OFF when an iPod/iPhone is connected (refer

to “Setting the AUX+ SETUP Mode” on page 16).

• If you connect an iPhone to this unit, it can be used as an iPod. If you

use iPhone as a hands-free phone, use the unit in which the
BLUETOOTH function is built.

• Internet and telephone functions of iPod touch or iPhone, etc., can

also be used when connecting to the unit. However, using these
functions will stop or pause the playing songs, at this time do not
operate the unit to avoid a malfunction.

• Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to

high temperature and humidity conditions, and damage may result.

iPod/iPhone models usable with this unit

• Confirmed devices regarding Made for iPod. Correct function

of earlier versions cannot be guaranteed.

iPod touch (Late 2009): Ver.3.1.3
iPod nano (5th generation): Ver.1.0.2
iPod classic (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.3.1.3
iPod nano (4th generation): Ver.1.0.4
iPod classic (120GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80GB, 160GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1

• Confirmed devices regarding Made for iPhone. Correct

function of earlier versions cannot be guaranteed.

iPhone 3GS: Ver.3.1.3
iPhone 3G: Ver.3.1.3
iPhone: Ver.3.1.3

• For clarity in identifying your model of iPod, please see

Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353.

• This unit does not support video playback from iPod/iPhone,

even using a video-compatible cable.

USB memory
(sold separately)

Cable (sold
separately)

This unit

USB Connection Terminal

USB memory
(sold separately)

iPod/iPhone (Optional)

VIEW

/ENT

Rotary encoder

/MUTE

/ESC

Preset buttons
(1 through 6)

4 5

SOURCE/

01GB00CDE-125EBT.book Page 21 Monday, September 27, 2010 10:08 AM