Yamaha PJP-100UH Manual Do Utilizador
17
SETTING MENU LIST
CONF
IGUR
A
T
IO
N
S
English
To specify the area to which this feature is available, use
the area select keys in “Microphone Mode” menu, and
then press
the area select keys in “Microphone Mode” menu, and
then press
. According to the pressed keys, audio in
the area of the following figure is picked up or not.
Microphone indicators (blue LED) of which direction
audio can be picked up from light up. This mode indicated
by
audio can be picked up from light up. This mode indicated
by
on the display.
y
• Press
to pick up audio from all directions.
• You can select multiple areas at the same time.
• You can select areas to where the audio pickup feature is not
• You can select areas to where the audio pickup feature is not
applied.
Using the keys on this unit
In the initial display, select “Settings”
In the initial display, select “Settings”
→ “Sound Settings”
→ “Microphone Mode”.
y
You can display “Microphone Mode” menu by pressing
continuously in the initial display or calling display.
■ Configuring the speaker mode
You can select the mode of audio output from the speakers
during call. The default setting is “Divide”.
• Monaural (default): Even during call with more than
during call. The default setting is “Divide”.
• Monaural (default): Even during call with more than
one location, the audio from other units is not divided
according to their locations. This mode is indicated by
according to their locations. This mode is indicated by
on the display.
• Small Area: The area from which the audio from other
units is limited as shown below (monaural output).
This mode is indicated by
on the display.
• Medium Area: The area from which the audio from
other units is limited as shown below (monaural
output). This mode is indicated by
on the display.
• Large Area: The area from which the audio from other
units is limited as shown below (monaural output).
This mode is indicated by
on the display.
Using the keys on this unit
In the initial display, select “Settings”
In the initial display, select “Settings”
→ “Sound Settings”
→ “Speaker Mode”.
y
You can display “Speaker Mode” menu by pressing
continuously in the initial display or calling display.
■ Configuring the room size
You can configure this setting depending on the room size
and operating environment. However, you do not need to
change it from “Large” (default setting) normally.
• Large (default): Position for using the unit in an
and operating environment. However, you do not need to
change it from “Large” (default setting) normally.
• Large (default): Position for using the unit in an
ordinary conference room, open space or office. The
communication quality is most stable in this position.
communication quality is most stable in this position.
This setting is indicated by
on the display.
• Medium: Select this position when echo is heard on
the other party of communication with the default
“Large” position. This position is selected when the
unit is used in a room with large reverberations. This
“Large” position. This position is selected when the
unit is used in a room with large reverberations. This
setting is indicated by
on the display.
• Small: Select this position when echo is still heard on
the other party of communication with the “Medium”
position. This setting is indicated by
on the display.
Within 2 m
Within 2 m
01EN_00_PJP-100UH_UCGB.book Page 17 Wednesday, August 23, 2006 1:49 PM