Ariens 911134 - LM21SW Manual Do Utilizador

GB - 12

Speed control rod changes the mower’s 
forward travel speeds.

High –Push rod all the way 
forward.

Low –Pull rod all the way 
rearward.

Start mowing slowly and use speed control 
rod to gradually increase speed to a safe, 
comfortable walking pace.

Speed control rod should hold the desired 
speed. If not, adjust speed control bell crank. 
(See SPEED CONTROL BELL CRANK  (self-
propelled models) on page 21.)

NOTE: Engine must be running for wheel 
drive to propel unit.
To drive forward:
Slowly squeeze and hold wheel drive control 
against handlebar.

To stop:

Release wheel drive control.

To hold wheel straight:

1. Push swivel wheel lock forward.
2. Push unit forward until wheel locks in 

place.

To allow wheel to swivel:

1. Pull swivel wheel lock back.

IMPORTANT: The fuel shutoff valve MUST 
be in the closed position prior  to transporting 
the unit.
Open the fuel shutoff valve to operate the 
unit.  Close the fuel shutoff valve when 
storing,  transporting or servicing the unit.

Fuel shutoff valve 
open.

Fuel shutoff valve 
closed.

CAUTION: Unit will move forward 
at engine start if wheel drive 
control is engaged. ALWAYS 
release wheel drive control before 
starting unit.

OM0480

STOP

GO

OM1240

CAUTION: Avoid loss of control. 
Lock swivel wheels when mowing 
on a slope or hill. Do not mow on 
steep slopes.

Lock - Wheel 
Held Straight

Unlock - Wheel 
Swivels

OM1700