Behringer BX1200 SPEAKERS Manual Do Utilizador

ULTRABASS BX1200

2. CONTROL ELEMENTS

With the SHAPE button

activated, use the SHAPE

control to modify the sound of the filter on channel 2.

The SHAPE filter is available on channel 2 only and

has no effect on channel 1.

The IN button activates the SHAPE filter: the LED above the

button lights up.
The BASS control in the EQ section allows you to boost or

cut the bass frequencies.
With the LOW MID control you can boost/cut the low

midrange frequencies.
The HIGH MID control adjusts the boost/cut of the upper

midrange frequencies.
The TREBLE control allows you to boost/cut the upper

treble range on your BX1200.

Use the sub-harmonics processor (button

pressed)

to add ultra-low bass signals by turning the ULTRABASS

control. The processing intensity is displayed by the LED

above the control. Unlike the SHAPE filter, the ULTRABASS

circuit is effective on both channels.
Press the IN button to switch on the sub-harmonics

processor: the LED above the button lights up.
Use the MASTER control to set the overall volume of your

BX1200.
Press the POWER switch to switch on the BX1200.

Please take note: Merely switching the unit off does

not mean that it is fully disconnected from the

mains. When not using the unit for prolonged

periods of time, please unplug the units power

cord from the power outlet.

2.2 Rear panel