Insignia NS-CLBT01 Folheto

V2 ENGLISH 12-1283

For more information about using your radio, see you

r User Guide.

90-day limited warranty

See your User Guide or visit www.insigniaproducts.com for details.
© 2013 BBY Solutions, Inc. All rights reserved.

Setting the time

1 Press Sleep for about two seconds until the

hour digits blink on the LCD.

2 Press or to increase the hour or press or

to decrease the hour. Make sure that AM or PM

displays correctly.

3 Press Sleep again. The minutes digits blink on

the LCD.

4 Press or to increase the minutes or press or

to decrease the minutes.

5 Press Sleep again or to save the time setting

and exit time setting mode.

Setting the alarm sound

Press (Alarm 1) or (Alarm 2). The or

icon blinks on the LCD.

To use the radio as the alarm sound, press

(Alarm 1) or (Alarm 2) once. Wait three

seconds to save the setting and exit alarm sound

setting mode.

To use the buzzer as the alarm sound, press

(Alarm 1) or (Alarm 2) twice.

Wait three

seconds to save the setting and exit alarm sound

setting mode.

3 To completely turn off the alarm, press (Alarm 1)

or (Alarm 2) repeatedly until the or

icon disappears from the LCD.

Setting the alarm time

1 Press and hold (Alarm 1) or (Alarm 2) for

about two seconds until the

time display blinks

on the LCD.

2 Press or to increase the hour or press or

to decrease the hour.

3 Press (Alarm 1) or (Alarm 2) again. The

time

display blinks on the LCD.

4 Press or to increase the minutes or press

or to decrease the minutes.

5 Press (Alarm 1) or (Alarm 2) again. The

Volume icon appears in the center of the LCD

and the volume digits blinks.

SNOOZE / DIMMER

6 Press or to increase the alarm volume or

press or to decrease the alarm volume.

7 Press (Alarm 1) or (Alarm 2) again to save the

time setting and exit alarm setting mode.

Turning off your alarm

• Press any button but (SNOOZE/DIMMER).

Using the snooze feature

• When the alarm sounds, press (SNOOZE/DIMMER).

The alarm turns off for 10 minutes and SNOOZE

appears on the LCD.

Setting the sleep timer

• Press Sleep repeatedly to select the amount of

time you want your radio to wait before it turns off

automatically. You can select 15, 30, 45, 60, or 90

minutes. The time you select and the SLEEP icon

appear on the LCD.

• To turn off the sleep timer, press Sleep repeatedly

until 00 appears and the SLEEP icon disappears.

Connecting an audio device

1 Plug an audio cable with a 3.5 mm connector (not

included) into the AUX IN jack on the back of your

radio and into the audio out jack on your audio device.

2 Press Source to turn on your radio, then press

Source repeatedly until AUX appears on the LCD.

3 Use the controls on the audio device to control

playback.

Playing your radio

1 Make sure that you have connected the AC power

adapter.

2 Press Source . Your radio turns on.

3 Press or to manually select a radio frequency.

Press and hold or to automatically tune to

the next lower or higher radio station.

4 Press or to increase or decrease the volume.

5 To turn off your radio, press and hold Source for

two seconds.

Playing audio from a Bluetooth device

Notes:
• Your Bluetooth device must be within 33 feet (10 meters)

of your radio.

• If you turn oﬀ your Bluetooth device or move it too far

from your radio, the pairing connection is lost. When you
move the last connected device within the radio's range,
the pairing connection is restored.

1 Make sure that your radio is turned on. Press

Source to turn on your radio, then press

Source repeatedly until Bluetooth appears on

the LCD.

2 On your radio, press and hold Pair/Preset for

six seconds. Your radio enters pairing mode.

NOTE: the clock radio will stay in pairing mode

for 30 minutes

3 Make sure that your Bluetooth device is turned

on and within 33 feet (10 meters) of your radio.

4 On your Bluetooth device, start pairing mode

and select NS-CLBT01-B.

See instructions that came with your Bluetooth

device.

• If your Bluetooth device is not turned on or is

too far away from your radio, the icon on the

LCD blinks every two seconds.

• While your radio is pairing with your Bluetooth

device, the icon on the LCD blinks twice a second.

• When pairing is complete, the icon on the

LCD lights solid.

To play from a paired Bluetooth device:

1 Press Source to turn on your radio, then press

Source repeatedly until Bluetooth appears on

the LCD.

2 To control playback:

• Press or to go to the previous or next song.

• Press and hold or to fast reverse or fast

forward through the songs on the Bluetooth device.

• Press Pair/Preset to start or pause playback.

SNOOZE / DIMMER