IBM 760C/CD (9546) Manual Do Utilizador
Numeric Error Codes
Symptom/Error
IBM ThinkPad Dock I
FRUs
Sequence of Actions
FRUs
Sequence of Actions
10X, 11X
101: Interrupt failure.
102: Timer failure.
103: Timer interrupt
failure.
failure.
104.: Protected mode
failure.
failure.
105: Last 8042
command not
accepted.
107: NMI test failure.
108: Timer bus test
failure.
command not
accepted.
107: NMI test failure.
108: Timer bus test
failure.
109: Low meg-chip
select test.
select test.
1. Adapter in slot (if
used)
2. Riser card
3. Main card
195
(The computer was docked
to the IBM ThinkPad Dock I
while in hibernation mode.)
(The computer was docked
to the IBM ThinkPad Dock I
while in hibernation mode.)
1. Do the following
steps.
a. Power-off and
undock the
system.
system.
b. Power-on and
shut down the
system.
system.
c. Power-off and
dock the system.
1XX
See the Hardware
Maintenance Manual of
the computer. If the
problem remains, go to
“Undetermined Problems”
on page 573.
Maintenance Manual of
the computer. If the
problem remains, go to
“Undetermined Problems”
on page 573.
2XX
201: Memory data
error.
202: Memory line error
00–15.
203: Memory line error
16–23.
error.
202: Memory line error
00–15.
203: Memory line error
16–23.
205: Memory test
failure on on-board
memory.
221: ROM to RAM
remap error.
failure on on-board
memory.
221: ROM to RAM
remap error.
1. See the Hardware
Maintenance Manual
of the computer.
of the computer.
2. Main card
3XX
See “External Keyboard”
on page 556.
on page 556.
566
IBM Mobile Systems - ThinkPad HMM Volume 3