Eton S350 Manual Do Utilizador

This player has the choice of 12 or 24 hour clock

modes that can be changed when the player is

turned on or off. Follow the steps below to select

the hour mode:

1.

Press SLEEP button for about three seconds,

HOUR MODE appears on the display.

2.

Press UP/DOWN buttons to select 12 HOUR 

or 24 HOUR mode then press SET button to 

save it.

Follow the steps below to set Alarm 1/Alarm 2

time:

1.

Press ALARM 1/ALARM 2 button to select 

Alarm 1 or Alarm 2.

2.

Press SET button and the hour indicator flashes.

3.

Press UP/DOWN buttons to select desired 

hour number.

4.

Press SET button again to save and the 

minute indicator flashes.

5.

Press UP/DOWN buttons to select desired 

minute number.

6.

Press SET button again to save minute time 

and the alarm time is set.

7.

Press ALARM ON/OFF button until the correct

alarm on/off sequence is found then press 

SET button to save or cancel. The “AL 1 or 

AL 2” icon will indicate accordingly on the 

display.

NOTE:
After the alarm is set, the LCD display shows the setting
for about ten seconds before resuming to the local time
clock.

Follow the steps below to activate/deactivate

Alarm 1/Alarm 2:

1.

Press ALARM ON/OFF button once to see 

“Alarm 1” and “Alarm 2” on display.

2.

Either press ALARM ON/OFF button 

repeatedly or press UP/DOWN buttons to 

find the desired alarm setting combination.

Once the power supply is connected initially or

after an extended period of non-use, the LCD dis-

play indicates “00:00 SATURDAY JAN/01/2000”.

You can select from numerous cities around the

world to serve as your local time zone. Once

your local time is set, the player can automatical-

ly tell you the time in different cities around the

world. Follow the steps below to set local time

and date:

1.

Press WORLD/LOCAL button for three seconds

until a city name appears on the display.

2.

Press UP/DOWN buttons to select your local 

city name or time zone.

3.

Press SET button for two seconds to save.

The city name changes to day of the week 

on the LCD display.

4.

Press SET button again and the city name 

reappears. Display starts to flash year.

5.

Press UP/DOWN buttons to select correct year.

6.

Press SET button again to save year setting.

Display starts to flash the month.

7.

Press UP/DOWN buttons to select correct 

month.

8.

Press SET button again to save month 

setting. Display starts to flash the day.

9.

Press UP/DOWN buttons to select correct day.

10.

Press SET button again to save date setting.

Display starts to flash the hour.

11.

Press UP/DOWN buttons to select correct 

hour.

12.

Press SET button again to save hour setting.

Display starts to flash the minute.

13.

Press UP/DOWN buttons to select correct 

minute.

14.

Press SET button again to save minute 

setting. The time and date are set.

To view world time, press WORLD/LOCAL button

repeatedly until the desired city name indicates,

then world time will be shown for about 4 sec-

onds. The “WORLD” indicator will flash at the

same time on the display.