Kenwood PKT-23K Manual Do Utilizador
20
■ Squelch Off
Press this key to hear background noise. Press the key
again to return to normal operation.
again to return to normal operation.
■ Super Lock-C
Press and hold this key for 4 seconds to lock the transceiver
keys. Super Lock-C locks the transceiver keys to prevent
accidental operation. Turning the transceiver power OFF and
then ON again will not disable Super Lock-C. To deactivate
Super Lock-C, with the transceiver power OFF, press and
hold the PF-2 key while turning the transceiver power ON.
keys. Super Lock-C locks the transceiver keys to prevent
accidental operation. Turning the transceiver power OFF and
then ON again will not disable Super Lock-C. To deactivate
Super Lock-C, with the transceiver power OFF, press and
hold the PF-2 key while turning the transceiver power ON.
•
When the LED lights yellow, release the PF-2 key.
•
While Super Lock-C is activated, you can still perform the
following actions: PTT, Squelch Off, Monitor, Power, Volume,
Channel Up/Down.
following actions: PTT, Squelch Off, Monitor, Power, Volume,
Channel Up/Down.
■ Super Lock-P
Press and hold this key for 4 seconds to lock the transceiver
keys. Super Lock-P locks the transceiver keys to prevent
accidental operation. Turning the transceiver power OFF and
then ON again will not disable Super Lock-P. To deactivate
Super Lock-P, with the transceiver power OFF, press and
hold the PF-2 key while turning the transceiver power ON.
keys. Super Lock-P locks the transceiver keys to prevent
accidental operation. Turning the transceiver power OFF and
then ON again will not disable Super Lock-P. To deactivate
Super Lock-P, with the transceiver power OFF, press and
hold the PF-2 key while turning the transceiver power ON.
•
When the LED lights yellow, release the PF-2 key.
•
While Super Lock-P is activated, you can still perform the
following actions: PTT, Squelch Off, Monitor, Power, Volume.
following actions: PTT, Squelch Off, Monitor, Power, Volume.
■ Tone Alert
Press this key to toggle Tone Alert on and off. Tone Alert
provides an audible alarm when signals are received on the
frequency you are monitoring.
provides an audible alarm when signals are received on the
frequency you are monitoring.
•
When Tone Alert turns ON, the LED indicator color cycles
through green, light blue, blue, purple, red, and yellow, and
white approximately every 30 seconds.
through green, light blue, blue, purple, red, and yellow, and
white approximately every 30 seconds.
•
When a signal is received, the LED indicator color cycles
through green, light blue, blue, purple, red, yellow, and white
approximately every 5 seconds.
through green, light blue, blue, purple, red, yellow, and white
approximately every 5 seconds.
•
Tone Alert ends once a signal is received. To reactivate
Tone Alert, press this key again. Press any key to stop the
5 second LED indicator cycle.
Tone Alert, press this key again. Press any key to stop the
5 second LED indicator cycle.