Clarity INT9 Manual Do Utilizador
Clarity - INT9 A/D converter
Installation
11
2.4.1
Measuring on multiple Instruments
Rather than dragging the entire INT9 A/D
Card Driver icon from the
Setup Control
Modules
list (see Fig. 5),
drag the
individual detector signals (TCD, FID in this
case) to separate Instruments . The
case) to separate Instruments . The
Instrument to which the particular signal is
connected is listed to the right of the
connected is listed to the right of the
detector name in the
Setup Control Modules
section.
Fig. 5.
System Configuration – multiple Instruments
Note:
Each independent Clarity Instrument must have
separate
Start
and
Ready
pins configured according
to the actual wiring.