Canon 580EX II Manual Do Utilizador

10

Set the power switch to <K>. 

X

The flash recycling starts.

 

The pilot lamp will first turn green (ready 
for quick flash), then red (flash ready).

 

Pressing the pilot lamp will fire a test 
flash.

Quick flash enables a flash to be fired before flash-ready, when the pilot 
lamp is still green.
Although the Guide No. will be 1/6 to 1/2 that of the full output, quick flash 
is effective for near subjects and when you want a shorter recycle time.
Set the drive mode to single shooting. Quick flash cannot be used in the 
continuous shooting, FEB, manual flash, and stroboscopic flash modes.

Quick flash can also be used during continuous flash shooting. 
(C.Fn-06 

→ p.27)

To save battery power, the power will turn off automatically after a 
certain period (approx. 1.5 min. to 15 min.) of idle use. To turn on the 
Speedlite again, press the camera’s shutter button halfway. Or press 
the Speedlite’s test firing button.

Auto Power Off can also be disabled. (C.Fn-01 

→ p.27)

 

A test flash cannot be fired while the camera’s operation timer 4 or 0 
is active.

 

The Speedlite’s settings will be retained in memory even after the power 
is turned off. To retain the Speedlite’s settings after you replace the 
batteries, turn off the power and replace the batteries within 1 minute.

A65_01.fm  Page 10  Friday, August 17, 2007  2:33 PM

COP

Y