Polaris PMS 419 Manual Do Utilizador

108

1. Place the vehicle on a level surface with the headlight approxi-

mately 25 ft. (7.6 m) from a wall. Place the transmission in PARK.

2. Measure the distance from the floor to the center of the headlight 

and make a mark on the wall at the same height.

3. Apply the brakes. Start the engine. Turn the headlights to high 

beam.

4. Observe the headlight aim. The most intense part of the headlight 

beam should be aimed 8" (20 cm) below the mark placed on the 
wall in step 2. Include the weight of a rider on the seat while per-
forming this step. 

5. If adjustment is necessary, turn the headlight adjustment screw to 

adjust the beam.

6. Repeat steps 4-5 until the beam is properly adjusted.

25 ft.

(7.6 m)

8" (20 cm)