Samsung NX1 Manual Do Utilizador
My Camera >
Shooting modes
83
When Trap Shot is selected
The camera takes photos continuously when it detects the subject moving
in the direction of the arrow at the line that you set.
in the direction of the arrow at the line that you set.
To position the vertical line on the screen, drag the arrow icon on the
vertical line to the desired point, and scroll command dial 1 or 2, or rotate
the navigation button.
vertical line to the desired point, and scroll command dial 1 or 2, or rotate
the navigation button.
You can also touch the area on the screen where the subject is expected to
pass through or manually adjust the focus by rotating the focus ring after
half-pressing [Shutter].
pass through or manually adjust the focus by rotating the focus ring after
half-pressing [Shutter].
•
When you select Trap Shot, the Direct Manual Focus (DMF) function is
automatically set.
automatically set.
•
When you select Trap Shot, the AF mode is set to Single AF and the AF area is
set to Selection AF.
set to Selection AF.
•
The area where the subject is expected to pass through must be in focus.
•
You cannot drag the line into the opaque area of the screen.
•
Subjects that are moving in the same direction may not be detected properly
depending on the angle of view or the size of the subjects.
depending on the angle of view or the size of the subjects.
•
The camera may not take the photo properly under the following conditions:
-
When the size of the subject is too small.
-
When the subject is moving quickly.
-
When there are moving objects in the background.
-
When you take photos in dark, indoor areas, such as an indoors sports
complex.
complex.
When Baseball is selected
The camera automatically takes the photo when it detects a ball at the
estimated hitting point that you set.
estimated hitting point that you set.
To position the vertical line on the hitting point, drag the vertical line on
the screen, scroll command dial 1 or 2, or rotate the navigation button.
the screen, scroll command dial 1 or 2, or rotate the navigation button.
To change the location of the batter and the ball, tap and drag the vertical
line to the batter‘s location facing the pitcher. You cannot drag the line into
the opaque area on the screen.
line to the batter‘s location facing the pitcher. You cannot drag the line into
the opaque area on the screen.
•
The camera may not take the photo properly under the following conditions:
-
When shooting outside of a ± 20° angle of view from a batter‘s side (in the
direction of a ball’s path).
direction of a ball’s path).
-
When the estimated hitting point is outside of the selectable area.
-
If there is a net or fence between you and the subject.
•
The camera may take a photo even when it does not detect a ball, such as
when the subject is backlit, when you take photos indoors, or when you take
photos without using a tripod.
when the subject is backlit, when you take photos indoors, or when you take
photos without using a tripod.