JVC GR-SXM77EA Manual Do Utilizador

 EN

Load a tape (

 pg. 15).

Set the Power Switch to “

”. If the DSC Lamp is

lit, press REFRESH for approx. 1 second to select
“VIDEO”.
To start playback, press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

●

The camcorder shuts off automatically after about
5 minutes in Stop mode. To turn on again, set the Power
Switch to “OFF”, then to “

”.

●

When the Power Switch is set to “

” and the LCD

monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.

●

The playback picture can be viewed in the viewfinder
(with the LCD monitor shut), on the LCD monitor or on
a connected TV (

 pg. 24, 25).

●

You can also view the playback picture on the LCD
monitor with it flipped over and retracted.

●

If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.

Rewind (2) Button

Fast-Forward (3) Button

Play/Pause (4/6) Button

Stop (5) Button

 Rotate BRIGHT towards “+” to brighten, or towards “–”

to darken.
●

The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in
Wide Mode (

 pg. 41).

 Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume,

or towards “–” to turn down the volume.
●

The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images
recorded in Wide Mode (

 pg. 41).

 Pauses during playback.

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
●

Noise bars will appear and the picture will become monochrome during Still Playback.

●

If TBC (

 pg. 23) is engaged, noise bars will not appear. This mode is called Fine Still.

 Allows high-speed search in either direction.

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
●

During playback, press and hold 

2

 or 

3

. The search continues as long as you hold the button. Once you

release it, normal playback resumes.

●

Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.