JVC GR-SXM77EA Manual Do Utilizador

 EN

Previous Page (2) Button

Next Page (3) Button

Still images shot using this camcoder are automatically
numbered, then stored in numerical order in the built-in
memory. You can view the still images stored in memory,
one at a time, much like flipping through a photo album.

Set the Power Switch to “

”. The VIDEO Lamp

comes on. If the DSC Lamp is not lit, press REFRESH
for approx. 1 second to select “DSC”. A still image
stored in memory is displayed.
•When no still image is stored in memory, the screen

becomes blue.

Press 3 or 2 to select the still image you want to
view.
•Each time 2 is pressed, the page goes back, while

each time 3 is pressed, the page goes next.

•If there are no stored images, “NO IMAGES

STORED” is displayed.

●

When the Power Switch is set to “

” and the LCD

monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.

●

The playback picture can be viewed in the viewfinder
(with the LCD monitor shut), on the LCD moitor or on a
connected TV (

 pg. 24).

●

When viewing a playback picture on a connected TV, it
may jitter slightly.

●

You can also view the playback picture on the LCD
monitor with it flipped over and retracted.

●

To brighten the LCD monitor, rotate BRIGHT towards
“

”. To darken the LCD monitor, rotate it towards “

”.

●

Even if you shoot a new picture after playing back a still
image with a low number, this will not overwrite the
existing picture because new pictures are automatically
stored after the still image most recently stored in
memory.

You can run through all the images stored in memory
automatically in numerical order.

Set the Power Switch to “

”. If the DSC Lamp is

not lit, press REFRESH for approx. 1 second to select
“DSC”.

Press MENU. The Menu Screen appears.

Rotate MENU to select “SLIDE SHOW” and press it.
The Slide Show starts.

To stop the Slide Show, press MENU twice.