JVC GZ-MG505AS Manual Do Utilizador

The camera is a microcomputer-controlled 
device. External noise and interference (from a 
TV, a radio, etc.) might prevent it from 
functioning properly.

● To solve the problem, first follow the 

instructions below.

● If the problem is not solved, reset the camera.  

(

墌 right column)

● If the problem persists, please consult your 

nearest JVC dealer.

To reset the camera
1) Press RESET using a piece of wire or other 

pointed instrument. The power is turned off 
once and turned on again automatically.

2) If nothing happens, set the power switch to 

OFF and remove the power supply (battery 
pack or AC adapter) from the camera, then 
reattach it.

3) Execute [PRESET] from the menu. The 

camera returns to its factory-preset. 
(

墌

● Connect the AC adapter securely. 

● Detach the battery pack once again and re-attach it firmly. 

● Replace the dead battery with a fully charged one. 

–

● When using the AC adapter, the camera enters the sleep mode, 

the access lamp lights, and the LCD monitor turns off.
To cancel the sleep mode, perform any operation such as 
zooming.

–

● The drop detection function operated.

Set the power switch to OFF, and turn the power on again. To 
turn off the drop detection function, set [DROP DETECTION] to 
[OFF]. 

M6E8Asia.book  Page 60  Friday, May 26, 2006  11:25 AM