JVC GR-D790U Manual Do Utilizador
MasterPage: Advan_Heading0_Right
42
EN
Still images can be dubbed from a tape to a
memory card.
memory card.
1
Load a cassette. (
2
Load a memory card. (
3
Set “SNAP/SLOW” to the desired mode.
(except “SLOW”,
4
Set the VIDEO/MEMORY Switch to
“VIDEO”.
5
Set the Power Switch to “PLAY” while
pressing down the Lock Button located on the
switch.
switch.
6
Set “[T]
➝ [M] COPY” to “ON”. ( pg. 35)
7
Press
6 to start playback.
8
At the point you want to dub, press
6
again to engage Still Playback.
9
To dub the image, press SNAPSHOT.
●
The “
” indication appears during dubbing.
NOTE:
To use Playback Special effects with a video
image you wish to dub, perform up to step
image you wish to dub, perform up to step
the remote control. (
Dubbing Still Images Recorded On
A Tape To A Memory Card
A Tape To A Memory Card
To use this camcorder as a player
1
Following the illustration,
“Connections To A TV Or VCR” , connect the
camcorder and the VCR’s input connectors.
camcorder and the VCR’s input connectors.
2
Perform steps
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
instruction manual.)
4
To stop dubbing, stop recording on the
VCR, then stop playback on the camcorder.
NOTES:
●
●
To choose whether or not the following displays
appear on the connected TV
• Date/time
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”
(
(
pg. 35). Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”
(
(
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV” (
TV” (
Dubbing To A VCR
FEATURES FOR RECORDINGS
EDITING
GR-D790US.book Page 42 Tuesday, November 7, 2006 1:39 PM