HP (Hewlett-Packard) 2425 TURBO Manual Do Utilizador
/RDGLQJWKH
0HGLD&DVVHWWH
&RQVXPDEOHV
cassette. Loading media in either cassette involves the following
basic steps:
basic steps:
Open the cassette
Set correct media size for the cassette
Load media in the cassette
Close the cassette
These steps are described in detail, later in this procedure.
»
Note:
Ensure that the media size matches the cassette size (for
example, letter/A4 media must be loaded only when the cassette is
set to letter/A4 size). Since the media cassette sends a media size
signal to the printer controller, using the wrong size media will cause
your image to be positioned incorrectly on the page or clipped.
set to letter/A4 size). Since the media cassette sends a media size
signal to the printer controller, using the wrong size media will cause
your image to be positioned incorrectly on the page or clipped.
Load media in either 500-sheet cassette as follows.
2SHQWKH&DVVHWWH
»
Note:
Open and close the cassette like a drawer when loading media.
If you remove the cassette it may take several minutes to correctly
reposition the cassette on the guide rails.
reposition the cassette on the guide rails.
1
Using the cassette handle, inside the pocket of the cassette,
pull the cassette away from the printer as far as it will go
without removing it from the printer.
pull the cassette away from the printer as far as it will go
without removing it from the printer.
&DVVHWWH+DQGOH