Fujifilm f601 Manual Do Utilizador

e If you think the camera is faulty, check the following once more

I tried to charge the
battery but the self-timer
lamp does not light.

i There is no battery in the camera.
i The camera and AC power adapter are not

connected correctly.

i Load the battery.
i Connect the camera and AC power adapter

correctly.

The self-timer lamp flashes
during charging and I can’t
charge the battery.

i The battery terminals are dirty.

i The battery is faulty or flat.

i Take the battery out briefly and then reload it.
i Wipe the battery terminals with a clean, dry cloth.
i Load a new fully charged battery.

No power.

i The battery is exhausted.
i The AC power adapter plug has come out of

the power outlet.

i The battery is loaded the wrong way round.

i Load a new fully charged battery.
i Plug the adapter back in.

i Load the battery in the correct direction.

Power cuts out during
operation.

The battery is exhausted.

Load a new fully charged battery.

Battery runs out quickly.

i You are using the camera in extremely cold

conditions.

i The terminals are soiled.

i The battery is flat.

i Put the battery in your pocket or another

warm place to heat it and then load it into the
camera just before you take a picture.

i Wipe the battery terminals with a clean, dry

cloth.

i Load a new fully charged battery.

No photograph is taken
when the shutter button is
pressed.

i The SmartMedia is damaged.
i The Auto Power Off function has switched

the camera off.

i The battery is exhausted.

i Load a new SmartMedia.
i Switch the camera on.

i Load a new fully charged battery.

No photograph is taken
when the shutter button is
pressed.

i No SmartMedia is loaded.
i The SmartMedia is fully recorded.

i The SmartMedia is write-protected.
i The SmartMedia is not formatted.

i The SmartMedia contact area is soiled.

i Load a SmartMedia.
i Insert a new SmartMedia or erase some

unwanted frames.

i Remove the write-protection.
i Format the SmartMedia.

i Wipe the SmartMedia contact area with

a clean dry cloth.

e If you think the camera is faulty, check the following once more

I can only select
“Suppressed Flash” flash
mode.

i Continuous shooting is selected.
i The “Landscape” Scene Position setting or 40-

frame continuous shooting is selected.

i Set continuous shooting to OFF.
i Change the Scene Position setting or the

Photography mode.

I can’t set the flash mode to “Red-
eye Reduction” or “Slow Synchro”.

The “Sports” Scene Position setting is selected.

Change the Scene Position setting or the
Photography mode.

I can’t select “Auto” or
“Forced Flash” flash mode.

The “Night” Scene Position setting is selected.

I can’t select “Auto” or “Red-
eye Reduction” flash mode.

“Aperture-priority Auto” mode is selected in the
Photography menu.

Select  “Program Auto” mode in the
Photography menu.

I can’t select “Auto” or
“Slow Synchro” flash mode.

“Shutter-priority Auto” or “Manual exposure”
mode is selected in the Photography menu.

I can’t set voice memo.

i Continuous shooting is selected.
i Scene position 40-frame continuous shooting

is selected.

i Set continuous shooting to OFF.
i Change the Scene Position setting or the

Photography mode.

I can’t set the self-timer.

i Scene position 40-frame continuous shooting

is selected.

i Change the Scene Position setting or the

Photography mode.

I can’t use the flash to
take pictures.

i The flash is closed.
i You pressed the shutter button while the

flash was charging.

i The battery is exhausted.

i Pop the flash up.
i Wait until charging is completed before

pressing the shutter button.

i Load a new fully charged battery.