Fujifilm ix-10 Manual Do Utilizador

 

29 

The camera 
switch is off. 

Make sure that the power on/off is set to ON. 

The batteries are 
discharged. 

Replace the batteries with freshly ones. Refer to page 9. 

The camera 
has no 
power. 

The batteries are 
inserted 
incorrectly. 

Check the battery orientation. Refer to page 9. 

Ensure that the 
green camera-
ready LED 
indicator is on 
and is not 
flashing. 

If the light is flashing, wait until it emits a steady light 
before taking the picture. The camera may be waiting for 
the flash to charge. 

Is the camera 
full? 

If the camera is full, you cannot take any more pictures. If 
the resolution is set to high (HI), set the resolution to 
normal (LO). Otherwise, delete some pictures to free up 
memory. Refer to page 18. 

The camera 
won’t take a 
picture. 

Is the camera 
connected to a 
computer? 

The camera’s buttons are not functional when connected 
to a PC. Disconnect the camera to take more pictures. 

Is the flash on? 

Ensure that the flash is set to always on or auto. Refer to 
page 15. 

The flash 
doesn’t 
work. 

The batteries may 
be weak. 

If the batteries are too weak, the flash is unable to 
recharge. Turn the camera off and wait a few seconds 
before turning it back on. If this doesn’t work, you need to 
replace the batteries with fresh ones. Refer to page 9. 

The images 
are blurry. 

The camera or 
subject was 
moving when the 
shot was taken. 

Hold the camera steady or put it on a tripod to take 
pictures. 

The image 
looks too 
dark. 

The flash is 
needed for the 
shot. 

Turn the flash on. Refer to page 15. 

You are facing a 
bright light when 
taking the picture.

Change the angle of the shot so that bright lights do not 
shine directly towards the camera lens. 

The image 
is too light. 

The flash is set to 
always on. 

Set the flash to auto flash. Refer to page 15.