Fujifilm 50i Manual Do Utilizador

W
indows

indows

9. Check that VC4CB104.INF

has been detected and then
click the [Next >] button.

The Windows 98 CD-ROM may also be
required during installation. In this event,
switch CD-ROMs as directed by the on-
screen instructions.

10. Click the [Finish] button.

11. FinePixViewer starts up and the “PictureHello” window

automatically opens. Check that the live video image is
displayed in the “PictureHello” window.

✽

If live images are not displayed, installation was not completed successfully.
Refer to “Troubleshooting” (P.78).

12. Remove the camera from the cradle. (/ P.21)

1 Exit FinePixViewer.
2 Check that the CHARGE/ACCESS lamp on the cradle is not flashing.
3 Switch the camera off.

☞ When a battery is loaded, the CHARGE/ACCESS lamp lights and charging

begins. If no battery is loaded or if charging has already ended, the
CHARGE/ACCESS lamp does not light.

4 Slide the camera off the cradle connector and lift the camera out of the cradle.
5 To prevent dust buildup on the connector, replace the connection socket cover

on the camera.

NOTE

6. The “Add New Hardware Wizard” dialog appears. Click the

[Next >] button.

If the dialog box does not appear, uninstall
(See P.63) and then re-install the PC
Camera Driver. (See P.29.)

7. Select “Search for the best driver for your device

(Recommended)” and click the [Next >] button.

8. Tick the “CD-ROM drive” checkbox and then click the [Next >]

button.

✽

If any checkboxes other than “CD-
ROM drive” are ticked, clear the
ticks so that “CD-ROM drive” is the
only checkbox ticked.

✽

The dialog shown may differ slightly on some types of PC.

NOTE

Windows 98/98SE

You can now view the images you shot on your FinePix50i on the PC
screen (/ P.36).
See P.56 for information on how to listen to your audio files.