Fujifilm Zoom Date 160ez Manual Do Utilizador

Trouble Shooting

Problems

Possible Causes

Solutions

See Page

During operation

The shutter can-
not be released.

After loading the
film and closing
the camera back,
“

´” blinks.

After loading the
film and closing
the camera back,
the film is
rewound and “

´”

is displayed.

The film is
rewound during
photographing.

The picture
counter blinks.

q Is “

” blinking on

the LCD?

w Doesn’t the power turn

on?

e Is “f” blinking on the

LCD?

r Is “´” displayed on the

picture counter?

t Is the AF lamp blinking in

the

q mode?

/Is the film pulled out to

the FILM TIP mark? Is it
pulled out beyond the
FILM TIP mark?

/Did you open the camera

back so as to take out the
film without checking that
the motor has stopped
and that “

´” is dis-

played?

/Did you press the n

button while the film in
mid-roll was loaded in the
camera?

/Did you take out the film

in mid-roll without rewind-
ing?

q Replace with the new

battery.

w Press the POWER button.

e The flash is charging.

Wait until “

f” stops blink-

ing (The flash takes
about 6 seconds to
charge).

r Take out the film, and

load an unused film.

t Taking pictures at 0.65 –

1.3m (2.1 – 4.3ft.) or use
the AF lock so that the
AF lamp lights up.

/Adjust the film length so

that the film tip is at the
FILM TIP mark, and load
the film again.

/Check that the motor has

stopped and that “

´” is

displayed. After that,
open the camera back
and take out the film.

/Be sure not to press the

n button while the film
in mid-roll is loaded in the
camera.

/After taking out the film,

remove the battery, press
the POWER button, and
check that the picture
counter is no longer dis-
played. Then load the
battery again.