Fujifilm 16243252 Manual Do Utilizador

The camera does not 
turn on.

•  The batteries are exhausted: Insert fresh or fully-charged spare batteries (

P 9).

•  The batteries are not in the correct orientation: Re-insert the batteries in the correct orientation (

P 9).

•  The battery-chamber cover is not latched: Latch the battery-chamber cover (

P 9).

•  The AC power adapter and DC coupler are not connected properly: Make sure that the AC power adapter 

and DC coupler are properly connected.

•  The camera has been left for an extended period with no batteries inserted and the AC power adapter/DC 

coupler unplugged: After inserting the batteries or connecting the AC power adapter/DC coupler, 
wait a few moments before turning the camera on.

The batteries run down 
quickly.

•  The batteries are cold: Warm the batteries by placing them in a pocket or other warm place and 

re-insert them in the camera immediately before taking a picture.

•  There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.
•  ON is selected for 

T MONITOR SUNLIGHT MODE: Select OFF to reduce the drain on the bat-

tery (

P 4).

•  The camera is in 

R mode: Select another shooting mode (P 22).

• 

x TRACKING is selected for F AF MODE: Select a different AF mode (P 50).

• 

J is selected for focus mode: Select a different focus mode (P 48).

•  The batteries are new, have been left unused for an extended period, or have been recharged without 

first being fully discharged (rechargeable Ni-MH batteries only): Discharge Ni-MH batteries using the 
P DISCHARGE option and recharge them in a battery charger (sold separately).  If the batteries 
do not hold a charge after repeated discharging and recharging, they have reached the end of 
their service life and must be replaced (

P 106).

The camera turns off 
suddenly.

•  The batteries are exhausted: Insert fresh or fully-charged spare batteries (

P 9).

•  The AC power adapter or DC coupler has been disconnected: Make sure that the AC power adapter and 

DC coupler are properly connected.