JVC GR-DVL522 Manual Do Utilizador

 EN

This feature lets you record still images that look like
photographs onto a tape.

Set the VIDEO/MEMORY Switch to “VIDEO”,

then set the Power Switch to “

” while pressing

down the Lock Button located on the switch.

Press the MENU/BRIGHT wheel in. The Menu

Screen appears.

Rotate the MENU/BRIGHT wheel to select “

CAMERA”.  Press it and the CAMERA Menu
appears.

Rotate the MENU/BRIGHT wheel to select

“SNAP MODE”, then press it.

Rotate the MENU/BRIGHT wheel to select the

desired Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select
“

 RETURN” and press it twice. The Menu Screen

closes.

Press SNAPSHOT. “PHOTO” appears while the

snapshot is being taken.

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the normal recording
resumes.

• Regardless of the Power Switch position (“

” or

“

”), Snapshot recording takes place using the

selected Snapshot mode.

Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar
to serial photography. (Interval between still images:
approx. 1 second)

●

To remove the shutter sound, 

墌

 “BEEP” on pg. 44, 46.

●

If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.

●

If Program AE with special effects (

墌

 pg. 36) is

engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such
a case, the icon blinks.

●

If SNAPSHOT is pressed when “DIS” is set to “ON”
(

墌

 pg. 45), the Stabilizer will be disabled.

●

The Motor Drive mode is disabled when “REC
SELECT” is set to “

 / 

” in the Menu

Screen (

墌

 pg. 47).

●

During tape playback as well, all snapshot modes are
available when “

 COPY” is set to “OFF” in

the Menu Screen (

墌

 pg. 48). However, the shutter

sound is not heard.

●

During  Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.

●

When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.

  

There is the sound effect of a shutter closing.