Alesis Legacy Series Audio Processor Synthesizer Manual Do Utilizador

 

 

 

 

 

 
 

 
 

 

Press this to turn the GRIP on and off. The button is lit 

blue when the GRIP is receiving power. This is a “soft” 
power switch that does not actually interrupt power, but 

simply suspends operation and turns off  the front-panel 
LEDs. 

 

This knob adjusts the level of  the input signal.  

 

This is the green meter that you see on the right side of  the 

front panel.   It displays the average level of  the louder of  
the Right or Left input signals.  It lights from left to right as 

the level of  the input signal increases. 
 

This indicator is the red light located to the right of  the 
INPUT meter. When lit it indicates that the input signal is 

clipping, which means that the signal is too great for the 
GRIP to handle. This can cause unpleasant distortion, so if  

this indicator lights up, you should lower the level of  the 
input signal.   

 

This knob adjusts the frequency of  the GRIP’s two-way 

crossover. The GRIP will process only those frequencies 
that fall below the one you set with the XOVER knob. This 

ensures that the unit processes only the frequencies you 
want it to process, leaving the higher frequencies untouched. 

The range of  this control sweeps from 40 Hz to 160 Hz.