Sanyo VPC-CA100TA Manual Do Utilizador

English

Set the clock.
1 Select “TIME”.
2 Press the SET button.

h The Set Time Screen 

appears.

3 Set the time to “19:30”.

h The time is set in the 

following order: Set the hour 

→ Set the minute.

h A 24-hour clock is used for 

the time display.

4 Press the SET button.

Set the order in which the date is 
displayed during playback.
1 Select “DISP”.
2 Press the SET button.

h The Set Date Format Screen 

appears.

3 Press [I] or [J].

h The date display order 

changes.

4 Press the SET button.

Press the MENU button.
h The date and time setting is completed.
h To display the Recording or Playback Screen, press the MENU button.

i Under normal conditions, while the battery pack is being replaced, an 

internal battery will maintain the date and time settings. However, there is a 
small chance the settings may be lost (the backup will last for about 
7 days). It is recommended to check that the date and time settings are still 
correct after replacing the battery pack and before shooting or recording of 
any type (follow step 1).

To correct the date and time settings
1 Turn on the camera.
2 Display the Option Setting Menu 1 (page 118).
3 Select “CLOCK SET” and press the SET button.

h The screen to set the date and time appears.
h The current date and time settings are shown.

4 Select the line you wish to change, and make the correction.