Sanyo VPC-E10GX Manual Do Utilizador

English

Be sure to fully charge the supplied or separately sold battery pack before 
using it in your camera. For charging the battery pack, use the supplied 
charger. 
Charge the battery pack if it is being used for the first time, and recharge it 
whenever the remaining charge is low (see “CHECKING THE REMAINING 
BATTERY CHARGE” on page 119).

i During charging, the charger and battery pack will be warm. This is normal 

and does not indicate a malfunction. 

i Move the battery pack and charger further away from the TV or radio. 

i It is recommended that the ambient temperature during charging be 

between about 10°C and 35°C (50°F and 95°F). Due to the characteristics 
of the battery pack, at temperatures below 0°C (32°F), it may not be 
possible to sufficiently charge it.

i When the battery pack temperature is high, the safety function may be 

activated and halt charging.

i A battery pack which has not been used for a long time 
i Newly purchased battery pack 

i Use a UL Listed, 1.8-3m (6-10ft), Type SPT-2 or NiSPT-2, AWG No.18 

power supply cord, rated for 125V 7A, with a non-polarized NEMA 1-15P 
plug rated for 125V 15A.