Sanyo VPC-HD1 Manual Do Utilizador

English

i A target mark & on the monitor shows the 

area the camera is focusing on.

i The camera automatically determines the 

correct focus by measuring from 5 
different focus points within the shooting 
area. If the target mark is at a position 
that is different from the point you wish to 
focus on, you can refocus, for example, 
by changing the shooting angle.

i The large target mark appears when 

the camera focuses on a wide area in 
the center of the screen.

i When the camera focuses and the target mark appears, at the same time, the 

shutter speed and aperture settings are also displayed. You can use them as a 
reference when shooting.

If the camera shake icon > appears...

i During still image shooting, if the shutter speed is slow and the possibility 

that the image may be blurred due to camera shake becomes high, the 
camera shake icon may appear on the monitor. In this case, use a tripod to 
stabilize the camera when shooting, or set the flash operation mode to 
automatic (page 61).

i When shooting with the scene select function set to the fireworks + 

mode, the camera shake icon always appears, but this is normal.

F3.5

1/40

Shutter speed

Aperture

Target mark