Sanyo VDC-DPN9585P Manual Do Utilizador

Lx

B
m

Swit
mon
also 
from

Base
the r
enha
and 
abilit
and 

A high-speed electronic shutter that is internally switchable for 
eight modes using a DIP switch allows adjustment increments 
from 1/50 to 1/10,000 sec.

The VDC-DPN9585P and VCC-PN9575P can operate on PoE, 
12 V DC (12–15V DC) or 24 V AC (50 Hz, and even at a toler-
ance of 

±

10%). Switching to the correct mode occurs auto-

matically when power is supplied.

Multi-spot metering measures luminous intensity in 64 areas on screen to enable 
optimal backlight compensation even for peripheral and moving objects.

(Analog Video Signal)

Featuring SANYO’s DSP circuitry and a high performance 1/4-
inch CCD for horizontal resolution of more than 520 TV lines 
and superior color reproduction. Sharp, crisp images are 
delivered for greater precision in surveillance under a varied 
range of conditions.

The VDC-DPN9585P and VCC-PN9575P feature two selectable 
backlight compensation modes: multi-spot metering (applied to 
the whole screen) and center-zone metering (applied to the 
central portion only).

When there is a house or even 
an object as small as a window 
within the camera frame, it is 
possible to mask the area so that 
it will not appear on the monitor 
screen to protect other’s privacy. 
Up to 8 rectangular masks of arbitrary size can be set. These 
masking areas may be protected with a 4-digit (max.) password.

Sensing is performed by splitting the field of view into 16 
areas. Movement and brightness levels within the picture are 
analyzed to accurately detect surveillance targets. Upon detec-
tion, the camera sends an alarm status signal and captures the 
object at zoom magnifications of up to x2.6. Fine adjustments 
of settings such as sensitivity, tracking time, zoom ratio and 
areas not requiring detection can also be made.

Areas with swaying trees or flickering light, etc. can be eliminated to avoid false 
alarms. Surveillance of the detected object can be conducted at a zoom magnification 
of x1.0, x1.4, x2.0 or x2.6.

VDC-DPN9585P

VAC-70

Monitor

Video coaxial cable

Both the VDC-DPN9585P and VCC-PN9575P come with a PT 
mechanism and allow panning of 335 degrees (110 degrees*) 
and tilting of 90 degrees (90 degrees*) to reduce blind spots in 
the surveillance area. When particular angles are preset on the 
camera (up to sixteen points), it moves to each position quick-
ly at the speed of 120 deg/sec. max. for both panning and tilt-
ing. Combining these features with the motion detector, it is 
possible to catch all actions taking place in the area.

*For wall-mounted cameras

Photos of VDC-DPN9585P

Panning
Tilting

0 to 335

°

0 to 90

°

–55 to 55

°

0 to –90

°

Panning
Tilting

Up to 16 preset positions (with 
different settings for pan, tilt and 
zoom) can be registered for a 
single VDC-DPN9585P or VCC-
PN9575P. A simple key entry to 
a controller allows you to easily switch to the scene you want to 
monitor. Auto-pan monitoring can be also be programmed by 
designating two end points on a horizontal plane.

Control switch 
inside camera

 (Sold Separately) 

Connection of the VAC-70 control unit allows adjustment of 
pan/tilt, angle of view, motion detector, backlight compensa-
tion and other functions from in front of a monitor. The lens 

angle can be adjusted directly via a control 
switch inside the camera housing.

Pu

Atta

Mod

In the

The p
Pleas

The c
can b
by sim

Hold 
detac

46.0

(1.81)

8.0

42.0

(1.65)

0608-V0282-03-0905-m10-24    06.9.5  20:26    ページ 5