SVAT Electronics WSE300 Manual Do Utilizador

w w w . s v a t . c o m

GENERAL SETUP

Connect the power jack of adapter

(DC 8V) to camera.

Turn on the monitor. Make sure that the

active channel on the monitor is the

same that is on the camera. Wait for

the LCD screen to display images.

Adjust the volume control to preferred

setting.

BATTERY INSTALL

The monitor should be turned off. Open

the battery compartment in the back of

the monitor. Install the rechargeable ion

lithium battery for portability purposes.

AC POWERED/RECHARGING

You can connect the adapter (DC +5V)

to power on receiver and charge up

the battery at the same time. The

indicator will light while charging and

turn off when the charging is complete.

MONITOR TO VIDEO FUNCTION

The monitor has one video output

which can be used to connect to a

VCR for recording. Connect the video

output wire to the output on the

monitor. Connect the yellow RCA end

of the wire to your VCR’s yellow input

connection.

NOTE: In order to view and record the images from the

WSE300, you must have the VCR on it’s input channel (not

channel 3). Other names for the input channel are line
1/2, AV channel, TV/Video channel and AUX channel.