Toshiba IK-WB01A Manual Do Utilizador
19
Introduction
Installation/Setup
Operation
Others
Connect the AC adaptor cable and the LAN cable
to the camera
to the camera
・For details, refer to "Connecting the Power Cord" (→ page 21) .
・If you are going to use a wireless LAN, you need to connect the AC
・If you are going to use a wireless LAN, you need to connect the AC
adaptor cable only.
Install the camera to the rear cover
・Fix the camera to the rear cover from the sides using four M3 screws.
Important
●
Take care not to trap the AC adaptor cable and LAN cable when attaching
the camera to the rear cover.
the camera to the rear cover.
■ Outdoor Installation
Insert the AC adaptor cable and the LAN cable
through the tube part of the rear cover
through the tube part of the rear cover
・The procedure is the same as that described in "Indoor Installation"
Step 2 on page 18.
・Insert both cables from below.
・If you are going to use a wireless LAN, you need to insert the AC
・If you are going to use a wireless LAN, you need to insert the AC
adaptor cable only.