Pentax RZ10 Manual Do Utilizador
112
3
Taki
ng Pi
ct
ur
es
Have a blank sheet of white paper or similar material ready.
1
In the [White Balance] screen, use the four-way
controller (23) to select K (Manual).
controller (23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the [A Rec. Mode] menu reappears.
5
Press the 3 button.
The camera returns to capture status.
You can set the area of the screen where the brightness is metered to
determine the exposure.
determine the exposure.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
To Set the White Balance Manually
Setting the AE Metering
L
Multi-segment
metering
metering
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
brightness and determines the exposure.
M
Center-weighted
metering
metering
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
picture with the center of the image having more influence
on the exposure.
N
Spot AE metering
The camera determines the exposure by metering the
brightness only at the center of the image.
brightness only at the center of the image.
MENU
A d j u s t
SHUTTER
W h i t e B a l a n c e
C a n c e l
C a n c e l
O K
O K
O K
C a n c e l
OK