Pentax T30 Manual Do Utilizador

Problem

Cause

Solution

Camera will not 
turn on

Battery is not installed

Check if a battery is installed. If not, 
install battery (p.15).

Battery is installed 
incorrectly

Check orientation of battery. Reinsert 
battery (p.15).

The battery is exhausted Charge the battery (p.14).
The battery performance 
has temporarily 
deteriorated because it is 
too cold

Warm up the battery by placing it in a 
pocket where it can come in contact 
with body heat.

No image on LCD 
monitor

Camera is turned off

Turn the camera on (p.20).

Camera is connected to a 
computer

The LCD monitor turns off when the 
camera is connected to a computer.

Camera is connected to a 
TV

The LCD monitor turns off when the 
camera is connected to a TV.

Display mode is set to Off

Touch the LCD monitor to change the 
display mode setting (p.41).

Power Saving function 
has activated

Deactivate by pressing the shutter 
release button halfway in Capture 
mode.

Image is displayed but is 
hard to see

Increase the brightness of the LCD 
monitor (p.162).

Shutter will not 
release

Flash is charging

Pictures cannot be taken while the 
flash is charging. Wait until charging is 
finished.

No available space on SD 
Memory Card or in the 
built-in memory

Insert SD Memory Card with available 
space or delete unwanted files (p.17, 
p.102). Change the picture size or 
quality or both and try again (p.54, 
p.108).

Recording

Wait until recording is finished.