Pentax Optios7 Manual Do Utilizador
66
Tak
ing Pi
cture
s
4
7
Press the shutter release button fully.
The picture is taken.
To switch to the screen for registering a frame, press the Green button
in Step 3. You can register frames which you have downloaded from the
internet, etc. When you register a new frame, it replaces one of the
existing frames in the built-in memory. Before you can register a new
frame, copy it first to the SD Memory Card.
in Step 3. You can register frames which you have downloaded from the
internet, etc. When you register a new frame, it replaces one of the
existing frames in the built-in memory. Before you can register a new
frame, copy it first to the SD Memory Card.
1
In the frame selection screen, choose the frame you
want to remove and press the Green button.
want to remove and press the Green button.
A message appears and the frames on the SD Memory Card that you
can register in the built-in memory appear.
can register in the built-in memory appear.
2
Use the four-way controller (45) to choose the frame
you want to register and press the OK button.
you want to register and press the OK button.
The frame is registered in the built-in memory instead of the frame
selected in Step 1.
selected in Step 1.
• The Recorded Pixels is fixed to 3M, and cannot be changed to any
other size.
• Continuous Shooting is not possible in Frame Composite mode.
To Register a New Frame
When a new frame on the SD Memory Card is registered in the built-
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.