Pentax 14762 Manual Do Utilizador
77
B
asic
O
p
er
at
ions
3
Using the Built-in Flash
Use the following procedures to take pictures in low light or backlit
conditions and when you want to use the built-in flash.
The built-in flash is optimum for a subject at a distance from 0.7 m to 5 m.
Exposure will not be properly controlled and vignetting (darkening of the
corners of the image due to a lack of light) may occur when used at a
distance closer than 0.7 m (this distance varies slightly depending on the
lens being used and set sensitivity. (p.185))
conditions and when you want to use the built-in flash.
The built-in flash is optimum for a subject at a distance from 0.7 m to 5 m.
Exposure will not be properly controlled and vignetting (darkening of the
corners of the image due to a lack of light) may occur when used at a
distance closer than 0.7 m (this distance varies slightly depending on the
lens being used and set sensitivity. (p.185))
For details on the built-in flash and instructions on how to take pictures with an
external flash, refer to “Using the Flash” (p.181).
external flash, refer to “Using the Flash” (p.181).
Setting the Flash Mode
Flash Mode
Function
C
Auto Flash
Discharge
Discharge
Discharges the flash automatically in dark or backlit
conditions.
conditions.
D
Auto Flash+
Red-eye Reduction
Red-eye Reduction
Discharges a pre-flash for red-eye reduction before
the automatic flash.
the automatic flash.
E
Flash On
Discharges the flash for each picture.
F
Flash On+
Red-eye Reduction
Red-eye Reduction
Discharges a pre-flash for red-eye reduction before
the main flash.
the main flash.
Compatibility of built-in flash and lens
Vignetting may occur depending on the lens being used and the
capture conditions. We recommend taking a test shot to check the
compatibility.
capture conditions. We recommend taking a test shot to check the
compatibility.
1
• When using the built-in flash, remove the lens hood before shooting.
• The built-in flash fully discharges for lenses without a function to set the
• The built-in flash fully discharges for lenses without a function to set the
lens aperture ring to s (Auto).