Pentax 14748 Manual Do Utilizador

99

4

4

Use the four-way controller (23) to select [Setting] and 
press the four-way controller (5).

The screen to set the noise reduction level according to the sensitivity 
appears.

5

Use the four-way controller (23) 
to select a sensitivity value and use 
the four-way controller (45) to set 
the level of noise reduction which is 
applied to the selected sensitivity.

Turn the rear e-dial (S) to display the 
[High-ISO NR 2] screen.
Press the | button to reset the setting of 
the selected sensitivity value.
The sensitivity values displayed vary according to the [1. EV Steps] and [2. 
Sensitivity Steps] settings made in the [A Custom Setting 1] menu (p.91).

6

Press the 3 button.

The screen that was displayed in Step 2 appears again.

7

Press the 3 button twice.

The camera is ready to take a picture.

Reduces noise during long exposures.

1

Select [Slow Shutter Speed NR] in the [A Rec. Mode 3] 
menu and press the four-way controller (5).

2

Use the four-way controller (23) 
to select [Auto], [On] or [Off], and 
press the 4 button.