Panasonic DMC-GF2 Manual Do Utilizador
- 159 -
Playback/Editing
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90o steps.
holding the camera vertically or rotate pictures manually in 90o steps.
1
Select [ROTATE] on the [PLAYBACK] Mode menu.
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
2
Press 2/1 to select the picture and then press [MENU/SET].
3
Press 3/4 to select the direction to rotate the picture and
then press [MENU/SET].
then press [MENU/SET].
•
Press [
] to return to the menu screen.
1
Select [ROTATE DISP.] on the [PLAYBACK] Mode menu.
2
Press 4 to select [ON] and then press [MENU/SET].
•
•
The pictures are displayed without being rotated when you select [OFF].
Note
•
[ROTATE DISP.] can only be used with the lens
compatible with the Direction Detection
Function
.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
the display rotation feature is disabled.
•
Rotation correction is limited to 90 degrees – from horizontal to vertical or vice-versa.
[ROTATE]/[ROTATE DISP.]
Rotate (The picture is rotated manually)
:
The picture rotates clockwise in steps of 90o.
:
The picture rotates counter-clockwise in steps of 90o.
Rotate display (The picture is automatically rotated and displayed)