Panasonic DMC-TZ10 Manual Do Utilizador

144   

VQT2R48

VQT2R48

   145

Some printers can print directly from the camera’s memory card.
For details, see the manual for your printer.

■

Press [MENU/SET]

 

●

Do not use any other USB connection cables except the supplied one.

 

●

Disconnect USB connection cable after printing.

 

●

Turn off power before inserting or removing memory cards.

 

●

When the battery begins to run out during communication, a warning beep sounds. 
Cancel printing and disconnect USB connection cable (recharge the battery before 
reconnecting).

 

●

Setting the [USB MODE] to [PictBridge (PTP)] removes the need to make the setting 
each time the camera is connected to the printer.

 

●

Motion pictures recorded in [AVCHD Lite] format cannot be printed. 

You can connect directly to a PictBridge-
compatible printer for printing.
Getting Ready:

 

• Charge the battery sufficiently. Or, connect 

the AC adaptor (optional) and DC coupler 
(optional). 

 

• Insert card and set mode dial to any setting 

except 

. When copying pictures from the 

built-in memory, remove any memory cards.
(Copy [CLIPBOARD] pictures to the card in 
advance)

 

• Adjust the print quality or other settings on 

your printer, as needed.

 

• Please make sure you use the 

supplied USB connection cable. Use 

of cables other than the supplied 

USB connection cable may cause 

malfunction.

When [CONNECTING TO PC…] 

is displayed, cancel the connection 

and set [USB MODE] (→26) to either 

[SELECT ON CONNECTION] or 

[PictBridge (PTP)].

(Print settings

 (→146

))

Check socket direction and insert straight in.

(Damage to socket shape can lead to faulty 

operation.)

 

• Do not disconnect the USB connection cable when 

the cable disconnection icon   is displayed (may 

not be displayed with some printers).

USB connection cable

(always use cable supplied)

Select item
(See below for details)

Print 
(Previous page  )

 

• [MULTI SELECT] :   Scroll between pictures with ▲▼◄►, select pictures to print with the 

[DISPLAY] button. (Press [DISPLAY] button again to release selection.)

                                Press [MENU/SET] when selection is complete.

 

• [SELECT ALL]    :Print all pictures.

 

• [PRINT SET (DPOF)] : Print pictures selected in [PRINT SET]. (→134)

 

• [FAVORITE]        : Print pictures selected as [FAVORITE]. (→133)

(displayed only when [FAVORITE] pictures are present and setting 
is set to [ON]).

 

●

Select [YES] if print confirmation screen is displayed.

 

●

An orange 

●

 displayed during printing indicates an error message. 

 

●

Print may be divided into several times if printing a large amount of pictures.
(Remaining sheets display may differ from set number.)

■

With [TEXT STAMP]
Recording date and following information can be embedded into still pictures (→128):

 

●

Recording date 

●

[NAME] and [AGE] from [BABY] and [PET] Scene Modes

 

●

[TRAVEL DATE] elapsed days and destination 

●

Text registered in [TITLE EDIT]

 

●

Names registered in [FACE RECOG.] 

 

●

Location name information recorded with the GPS function 

 

• Do not add date printing in stores or with printers to still pictures where [TEXT 

STAMP] is applied (text may overlap).

■

 

●

Printing in store: Only recording date can be printed. Request date printing in store.

 

• Making [PRINT SET] settings on the camera in advance allows settings for numbers 

of copies and date printing to be designated before giving the card to the store.

 

• When printing still pictures of 16:9 Aspect Ratio, check in advance that the store 

can accept this size.

 

●

Using computer : Print settings for recording date and text information can be made 

using the supplied CD-ROM ‘PHOTOfunSTUDIO’.

 

●

Using printer    : Recording date can be printed by setting [PRINT SET] on the 

camera, or by setting [PRINT WITH DATE] to [ON] when connecting 
to a printer compatible with date printing.

Example of DMC-TZ10/

DMC-ZS7