Nortel Networks COOLPIXS610GR Manual Do Utilizador

Movie

s

To shoot movies with sound recorded via the built-in microphone, select shooting 
mode and follow the steps below.

Enter movie mode by pressing the 
e button in shooting mode, 
selecting D (use the rotary multi 
selector), and then pressing the 

k 

button.

Exposure count display shows maximum 
total length of movie that can be recorded.

Press the shutter-release button all 
the way down to start recording.

The camera focuses on the subject in center 
of frame.

A progress bar at the bottom of the monitor 
shows the amount of recording time 
remaining.

To end recording, press the shutter-release button all the way down a second time.

Recording stops automatically when the internal memory or memory card becomes full, 
recording time reaches 30 minutes, or movie file size reaches 2 GB.

B

• Flash mode (

A 30), self-timer (A 32), and exposure compensation (A 34) cannot be applied or 

changed. Macro mode (

A 33) is available. 

• Macro mode setting cannot be applied or changed while movies are being recorded. Apply or 

change setting as necessary before movie recording begins.

• Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied 

before movie recording begins. However, digital zoom (up to 2×) can be applied while movies are 
being recorded.

B

When the movie has been fully recorded to the internal memory or memory card, the monitor 
display will revert to the normal shooting mode display. Do not open the battery-chamber/
memory card slot cover while movies are being recorded. Turning the camera off or removing the 
memory card while movies are being recorded could result in loss of data or in damage to the 
camera or card.

D

Movie options and autofocus mode settings can be changed in the movie menu (

Movie

12s

12s

12s