Nikon 26463 Manual Do Utilizador

Sh
ooting Fea

tures

Metering

Allows you to set the method that the camera uses 
to measure the brightness of the subject.
• Default setting: Matrix

Continuous

Allows you to select single or continuous shooting.
• Default setting: Single

ISO sensitivity

Allows you to control the camera’s sensitivity to light.
• Default setting: Auto
When Auto is selected, E is displayed in the 
monitor while shooting if ISO sensitivity increases.
• In 

m (manual) mode, when set to Auto or Fixed 

range auto, the ISO sensitivity is fixed at ISO 100.

Exposure 
bracketing

The exposure (brightness) can be changed 
automatically during continuous shooting.
• Default setting: Off

AF area mode

Allows you to change the method of how the 
camera selects the focus area for autofocus.
• Default setting: Target finding AF

Autofocus mode

Allows you to select either Single AF, which focuses 
only when the shutter-release button is pressed 
halfway, or Full-time AF, which continues focusing 
even when the shutter-release button is not pressed 
halfway.
• Default setting: Single AF

Flash exp. comp.

Allows you to adjust the flash output.
• Default setting: 0.0 

Noise reduction 
filter

Allows you to set the strength of the noise reduction 
function that is normally performed when saving 
images.
• Default setting: Normal

Active D-Lighting

Allows you to prevent loss of contrast details in 
highlights and shadows and well reproduce the 
natural contrast that is seen with the naked eye when 
shooting images.
• Default setting: Off

Multiple 
exposure

Allows you to combine two to three images and save 
them as a single image.
• Default setting:

- Multiple exposure mode: Off
- Auto gain: On

Save user 
settings

Allows you to save the current settings in mode dial 
M (A57).

Option

Description

A